The washbasin ‘Lia’ is a 3/4 steel barrel, the rear part is separated and reinforced by incorporating square pipe and flat iron. This creates a straight side on the round 200-liter barrel, ideal for positioning and screwing directly to the wall. Two storage compartments are incorporated in the bottom part of the recycled oil drum, and the shelves are elaborately made from old pallet boards: cut, sanded, flamed and clear varnished. The manufacturing edges are provided with a safe edge protection. The interior of the barrel is painted mottled gray, and the exterior color is a choice of various matt finishes. The washbasin barrel can also be used as a sink, because the high-quality stainless-steel sink (Ø 40cm) is selected extra deep. A 35mm hole provides space for any standard washing or sink faucet, this is not included Two holes (Ø 40mm & 50mm) are prepared at the back of the barrel for the fresh and waste water pipes. Hand washing barrel ‘Lia’ is an extremely useful eyecatcher from Tonnen Tumult.
Note: Please have the installation of the washbasin tap and drain including the overflow installed and sealed by a specialist. We are not liable for any water damage. Also: This is where water meets metal, if there is permanent water in the edges of the barrel, a rust pantina will eventually develop.
At this point, we would like to point out that Tonnen Tumult furniture are perfectly finished but visually imperfect! They are upcycled products, i.e., already used industrial goods that have been modified into a piece of furniture. The bins have occasional small dents under the new lacquer and the wooden boards have small nail holes. These mini-flaws are visible even after processing and are also intentional! This is retro-industrial style! In addition, the underside of the bottom fold or the feet can have slight scratches due to motion during processing, but these are not visible in use (as written, underside).
